“C4G multi fold sliding was designed specifically with space constrained properties in mind allowing you to have an automatic gates”

Motorised Corner Fold Sliding Gates

C4G Automation has innovated the first turning sliding gate of its type in India. Watch the Images below to see how our innovative C4G turning sliding gate is providing options for situations that previously ruled out a sliding gate.

The C4G multi-fold sliding gate system is an option for narrow properties where driveway width is restricted or where obstacles prevent traditional sliding gates. Our multi-fold sliding gates are made from two or more panels, fitted with our turning rollers that allows the panel to turn down the side boundary of the property. Gates can be designed to slide open like our standard automatic sliding gates. Many clients, particularly in India want an electric gate system to secure their property but their driveway has limited space for access. Electric gates are not permitted to swing outwards towards a public highway and a standard sliding gate would require too much space to open, so often, the best solution can be found by installing a round the corner sliding gate.

Automatic multi fold sliding gates are also a good solution where the driveway slopes up and away from the gates, where the slope would have prevented swing gates from opening, sliding gates are ideal for automatic operation there. C4G Gates can offer clients a custom made round the corner sliding gate system which affords clients benefit of excellent utilisation of space, increased security, not protruding over a property boundary line whilst enhancing the value and saleability of a property. At C4G offer the highest quality of curved track sliding gates. A special curved sliding gate track can be fabricated to conform to practically any radius.


  • Perfect for sites where there is little or no back-run /Parking Space

  • Wheels mounted within gate leaves slide over embedded ground tracks

  • Low maintenance – bearings and track do not need to be oiled

  • Gates can be locked in open or closed position

  • In case of power failure -just unlock device with personalized key

  • Control to stop anytime while gate is moving

  • To achieve the maximum clear opening where the run back is very restricted, these Gates is ideal

  • Electromechanical gear motors range: 400 to 5000Kg for heavy gate application

  • Range of brackets for various fixing methods

  • Tapered edge track profile means gate rollers always run smooth and do not snag or bind

  • Optical beam sensor: Safety device to detect presence of vehicles and reversal of gate movement

  • Compact size – allowing for space utilization

  • Turning gates are effectively a clever twist on the tracked sliding gate

  • Available with hinged side & inbuilt wicket gates for pedestrian use

  • Turning gates are effectively a clever twist on the tracked sliding gate

  • Gates can be interlocked with entrance boom barrier as additional safety

  • Sand blasting, hot deep galvanizing process, painting can be provided

Corner Folding Sliding Gate
Width Min./Max. Single Leaf : 1200/16000mm
Double Leaf :1200/32000mm
Height Min./Max. 1000/2800mm
Larger Dimension on request
Opening Direction Horizontal Folding
Mounting Location Inside/ Outside
Mounting Surface Bottom Rail: RCC
Columns : RCC
Pattern Standard Mild Steel Tubular pattern
Internal vertical member Heavy Duty Vertical Box sections
(or Customized design available on request)
Bottom Rail Polished bright bar( round, rectangular, square ) with I-beam or C-channel support
Dual track bottom rail for large opening gates as per design, ( Mild Steel, Galvanised steel, Stainless Steel )
Bottom Rollers Heavy Duty Bottom Turntable Wheel and Running Wheel with both side bearings and Wheel cups,  ( Mild Steel, Galvanised steel, Stainless Steel )
Full height Column Heavy Duty Box Section
(or Customized design available on request)
Guide Rollers Nylon Rollers with bearings both side mounted on column for support & smooth movement of gate.
Other available gate material Stainless Steel,
Hot dip Galvanized Steel, Cast Iron Steel, Mild Steel
Sheets M.S/GI/Perforated /Aluminium sheets
Polycarbonate / Acrylic / PVC Sheet/Glass/Wood/WPC Wood/Fundermax panels
Ornamental Designs On Request or as per client or architect design.
Options Available Spikes as per requirement
Wicket gate/Side Gates in the similar pattern as the main gate
Any type of Customized Design can be made on request.
Surface Finish Surface preparation:-Sand Blasting
Standard: Primer Finish
Optional: Enamel Painting/Duco/PU painting/ Powder coating/ Hot deep Galvanising
Drive Unit Imported & Indian make electromechanical drive having features such as powerful startup & thermal sensors
Single( A.C & D.C )/Three Phase
Emergency Operation Manual release knob
Accessories (Optional)
Operational Accessories
Additional Push Button
Key switch
Remote Control with receiver
Magnetic Loop Detector
Safety Accessories
Safety Photocell
Vertical Safety Edge Sensor
Indicative Accessories
Flashing Light
Features Interlocking with existing boom barriers if required
  • 1


  • 2


  • 3


  • 4


  • 5

    Food Industries

  • 6

    Retail & Mall

  • 7


  • 8


  • 9


  • 10

    Villa Residency

  • 11

    Chemical Industries

  • 12

    Educational Institutions


Enter your keyword