"The C4G Tracked Bi-Folding Gate consists of two posts, onto each post a bi-folding leaf is attached by hinges"

Motorised Bi Folding Swing Gates

If You Have Limited Space, The Swinging Bi-Fold Gate Is Your Best Option

Our unique bi fold gates offer a space-saving solution for homes with limited or restricted entry spaces, where traditional swing gates or sliding gates are not practical. Those with small or narrow properties, short or restricted driveways, trees on the periphery or townhouses with limited entryways will find bifold driveway gates to be the ideal solution, as they fold outwards instead of sliding to the side. Each leaf of the bifold gate concertinas back into the next one, thereby reducing the distance required for the gate to open or close.

Bi-Folding Tracked Gate

The C4G Tracked Bi-Folding Gate consists of two posts, onto each post a bi-folding leaf is attached by hinges. The posts are connected by an overhead operator box which is cleated to and supported by an adjacent external structure, generally integral to a building. The bi-folding leaf utilises and overhead guide track within the underside of the operator box assembly, there is no requirement for ground guides or track.

Bi-Folding Trackless Gate

The C4G bi-folding trackless Gate represents the fourth generation of a folding security gate product developed by C4G Automation and provides the most versatile speed gate to date. With no requirement for a ‘top box’ or ground track, this trackless bi-folding speed gate truly offers a low cost but highly effective solution to vehicular access control. The C4G trackless bi-folding gate consists of a post onto which a bi-folding leaf is attached. Unlike other bi-folding gate systems, this does not require a track either in the ground or overhead to fold the leaf but uses a folding system housed inside a casing on top of the post hung leaf.


  • Gates can be provided with either top or bottom guide track or in a new trackless version

  • One pair of bi-folding gates up to max 5 meters.

  • Single unit bi-folding gate up to max 10 meters

  • Gates are specially designed with top and bottom pivot mechanism

  • No gaps above the bi fold swing gate when installing into an existing structural aperture

  • Bi folding swing gate systems come complete with a through photo beam system between posts

  • Dust proof operating mechanism increases the life of our gates

  • Our Gates leafs are free from sagging/bending

  • Suits gates up to a weight of 1200kgs

  • Anti crushing safety device built in to the system

  • Easy to operate manual release in case of a power black out.

  • Opening / closing speed– fully programmable for slower speeds

  • Trackless design means unlimited overhead clearance and no special drains below

  • Ideal for tight spaces where there is little room to swing or slide a traditional automated gate

  • Unit arrives ready to bolt down and turn on, virtually no field assembly required

  • Electro-mechanical continuously rated overhead drive and guide track system

  • Infill can be custom designed to suit any architectural or client brief

  • Control to stop anytime while gate is moving

  • Sand blasting, Hot deep galvanizing process, painting can be provided

Motorised Bi Folding Swing Gates
Width Min./Max. Single Leaf : 1000/3300mm
Double Leaf :2000/7100mm
Height Min./Max. 1200/2300mm
Larger Dimension on request
Max. Number of Leaves Single Bi Folding Leaf:1 Nos
Double Bi Folding Leaf:2 Nos
Mounting Location Inside/ Pillar center
Mounting Surface Columns : RCC
Pattern Standard Mild Steel and Stainless Steel Tubular pattern
Internal member Heavy Duty Vertical Box sections
(or Customized design available on request)
Outer Frame Heavy Duty tubular box section
(or Customized design available on request)
Bottom Rollers Heavy Duty Bi Folding Swing Bottom Wheel with both side bearings and Wheel cups,  ( Mild Steel, Galvanised steel, Stainless Steel )
Full height Column Heavy Duty Box Section
(or Customized design available on request)
Hinges High precision top & bottom pivoted hinges with ball bearing / heavy duty hinges
Other available gate material Stainless Steel,
Hot dip Galvanized Steel, Cast Iron Steel, Mild Steel
Sheets M.S/GI/Perforated /Aluminium sheets
Polycarbonate / Acrylic / PVC Sheet/Glass/Wood/WPC Wood/Fundermax panels
Ornamental Designs On Request or as per client or architect design.
Options Available Spikes as per requirement
Wicket gate/Side Gates in the similar pattern as the main gate
Any type of Customized Design can be made on request.
Surface Finish Surface preparation:-Sand Blasting
Standard: Primer Finish
Optional: Enamel Painting/Duco/PU painting/ Powder coating/ Hot deep Galvanising
Drive Unit Motor arm or Underground motor selection done on space availability & frequency of operation.
Single( A.C & D.C )Phase
Emergency Operation Manual release knob
Accessories (Optional)
Operational Accessories
Additional Push Button
Key switch
Remote Control with receiver
Magnetic Loop Detector
Safety Accessories
Safety Photocell
Vertical Safety Edge Sensor
Indicative Accessories
Flashing Light
Features Interlocking with existing boom barriers if required
  • 1


  • 2


  • 3


  • 4


  • 5

    Food Industries

  • 6

    Retail & Mall

  • 7


  • 8


  • 9


  • 10

    Villa Residency

  • 11

    Chemical Industries

  • 12

    Educational Institutions


Enter your keyword