“Sectional Overhead Doors benefit from many unique features and are individually specified, manufactured, installed and maintained to ideally suit your individual needs"

Transparent Sectional Overhead Doors

Industrial sectional doors open and close vertically, meaning space around the opening can be utilised. The door panels curve upwards over the opening and then back into the headroom of the industry. When fitted and specified accurately, a Sectional door can offer full drive-through height and width, which is unlike most other industrial sectional door types. This is a great solution for industrial that require large vehicle access, or have limited access dimensions.Originally, Sectional doors were designed to be fitted behind the opening, limited by the positioning of the springs and the guides. However these doors can now be fitted in between the opening through the use of adapted installation kits and alternate gear mechanism options.

The overhead sectional door slides up under the roof when opened, thereby giving free space in and around the door opening. We offer a complete range of overhead sectional doors and glazed frame doors. All doors provide good tightness and strength. They can be supplied as fully covered or semi-glazed versions or fully glazed for optimal daylight inlet or exposure possibilities.

Attractive and easy to operate, glazed and panel overhead sectional doors are a durable, tight-sealing fit for all manner of industrial and commercial facilities. We consider these industrial sectional doors to offer an uncompromising level of quality and reliability not just for the door panel and operating mechanism quality but also the highly developed and state of the art access control and automation systems used. The excellent pricing of the C4G sectional doors also makes it a very sensible and attractive solution for most commercial and industrial premises.

“C4G Industrial doors benefit from many unique features and are individually specified, manufactured, installed and maintained to ideally suit your individual needs. Our industrial sliding doors are produced using only top quality materials, electric operator system and components, alongside advanced production techniques to ensure total customer satisfaction, year, after year, after year”

TRANSPARENT SECTIONAL OVERHEAD DOORS

  • High opening and closing speed as compared to other sliding doors

  • Available as motorized operated with bottom mounted Italian make motorized system.

  • Heavy duty bottom track & top mounted guiding track for sliding operation of the door.

  • Bottom roller assembly& top track roller bracket assembly designed for linear motion & top support for the door.

  • Wicket door for easy access may be incorporated into a sliding door

  • Perfect opening solution of partial sliding (single side or bi parting) of door panels can be decided on the actual space available for door parking.

  • At each end, a track stopper is placed to absorb any impact and to hold the door in the open or closed position

  • Additional guides at the bottom prevent the door from oscillation

  • Interlocking facility between two doors

  • Doors can be constructed with vertical EPDM rubber seal to prevent dust and provide complete sealing

  • The C4G sliding door gear range is designed for continuous hard wearing use with sliding doors up to 3000Kgs

  • A total safety system, automatic sliding doors are designed to meet all operational & safety needs

  • Unlimited widths for manually operated ‘push along’ doors

  • Quick release disengaging mechanism inside sliding doors enables changeover to manual operation in case of power failure

  • These sliding doors can be locked in open or closed position

  • Control to stop anytime while garage door is moving

  • Infrared sensor system reverses the direction of the door if any obstruction cuts across the invisible light beam

  • Can be designed in 2 to 3 leafs for single slide motion.

  • Our Transparent sectional Overhead doors are made of extruded cold profiled, anodized or painted Aluminium sections

  • Aluminium profile incorporating synthetic double glazing to form suitable transparent door panels

Mounting Location
Technical Specification Description
Product Motorized Sliding Doors
Door Type Single side / Bi-parting Type
Door Mounting On Top Track Mechanism
Opening Direction Horizontal
Mounting Location Inside/Outside
Mounting Location
Opening Direction Horizontal
Mounting Location Inside/Outside
Mounting Location
Opening Direction Horizontal
Mounting Location Inside/Outside
Opening Direction Horizontal
  • 1

    Hospitals

  • 2

    Pharmaceutical

  • 3

    Aircraft

  • 4

    Shipyards

  • 5

    Food Industries

  • 6

    Retail & Mall

  • 7

    Automobiles

  • 8

    Engineering

  • 9

    Logistics

  • 10

    Villa Residency

  • 11

    Chemical Industries

  • 12

    Educational Institutions

ACCESSORIES

error: Content is protected !!

Enter your keyword