“Telescopic tracked gates can be made with up to three sections, and can reduce the run back required by 75%, compared to a single leaf gate”

Motorised Telescopic Sliding Gates

An ingenious idea that incorporates a sliding and concertina gates, ideal for spaces that are restricted or tight.

To achieve the maximum clear opening where the run back is very restricted, the telescopic gate is ideal. Telescopic tracked gates can be made with up to five sections, and can reduce the run back required by 75%, compared to a single leaf gate. Our special static drive system allows all the leaves to move simultaneously, alternatively we can utilize a special moving drive system that is incorporated into the leading gate leaf, and driving the rear wheel. Each telescopic gate panel will move at a different speed so that the final position is reached simultaneously, operated by specially design telescopic mechanism. The telescopic gates can be personalized and are manufactured to specific site requirements; they are suitable for medium to heavy duty applications.

The span can cover an area of upto 25mtrs.

Telescopic gates basically allow twice the opening width into half the space. For example if you had a four metre opening but only two and a half metres of run off area with a standard sliding gate there is simply no way. Using the telescopic gate kit allows the four metres to slide neatly behind the two and a half metre run off area leaving your four metres clear.


Space- A telescopic gate will open into a space smaller than the entrance to which it is positioned. This is idea when a conventional sliding gate does not have enough space or parking space is limited and swing gate will not work.

Speed- Telescopic gates move open and close very quickly. A lot of consideration needs to be paid towards gate safety (below).

Security- Another advantage of telescopic gates are that they move incredibly quickly and cannot be forced open without exceptional leverage.


  • High opening and closing speed as compared to other sliding gates

  • Safety clips are additional high wind protection to help prevent gate tip-over in high wind conditions.

  • Electromechanical gear motors Range: 400 to 5000Kg for heavy gate application.

  • Telescopic gates provide long life with minimum maintenance

  • Telescopic gates are suitable for very large openings

  • In case of power failure -just unlock device with personalized key

  • Perfect for sites where there is little or no back-run /Parking Space

  • Custom fabricated telescopic sliding gates in a wide range of styles

  • Wheels mounted within gate leaves slide over embedded ground tracks

  • Reliable and economical electrical drive units with almost silent operation

  • Can be designed in 2 to 3 leafs for single slide motion.

  • Gates can be interlocked with entrance boom barrier as additional safety.

  • Various industrial gate designs available to suit clients choice

  • Sand blasting, hot deep galvanizing process, painting can be provided

  • Quick release disengaging mechanism inside sliding doors enables changeover to manual operation in case of power failure

  • Optical beam sensor: Safety device to detect presence of vehicles and reversal of gate movement

  • It can be integrated with any kind of access controller system i.e. RFID device, Fingerprint and Biometric devices, Remote, card dispenser and Push button etc…

Motorised Telescopic Sliding Gates
Width Min./Max. Single Leaf : 1200/16000mm
Double Leaf :2200/32000mm
Height Min./Max. 1000/2700mm
Larger Dimension on request
Opening Direction Horizontal
Mounting Location Inside/ Outside
Mounting Surface Bottom Rail: RCC
Columns : RCC
Max. Number of Leaves Single Leaf : 3 No’s
Double Leaf : 6 No’s
Outer Frame Heavy Duty tubular box section
(or Customized design available on request)
Internal vertical member Heavy Duty Vertical Box sections
(or Customized design available on request)
Bottom Rail Polished bright bar( round, rectangular, square ) with I-beam or C-channel support
Dual track bottom rail for large opening gates as per design and Multiple Rail suitable for multiple panels ( Mild Steel, Galvanised steel, Stainless Steel )
Bottom Rollers Heavy Duty Bottom Wheel with both side bearings and Wheel cups,  ( Mild Steel, Galvanised steel, Stainless Steel )
Full height Column Heavy Duty Box Section
(or Customized design available on request)
Mechanism Specially designed back to back run Telescopic Mechanism
Guide Rollers Nylon Rollers with bearings both side mounted on column for support & smooth movement of gate.
Other available gate material Stainless Steel,
Hot dip Galvanized, Cast Iron
Sheets M.S/GI/Perforated /Aluminium sheets
Polycarbonate / Acrylic / PVC Sheet/Glass/Wood/WPC Wood/Fundermax panels
Ornamental Designs On Request or as per client or architect design.
Options Available Spikes as per requirement
Wicket gate/Side Gates in the similar pattern as the main gate
Any type of Customized Design can be made on request.
Surface Finish Surface preparation:-Sand Blasting
Standard: Primer Finish
Optional: Enamel Painting/Duco/PU painting/ Powder coating/ Hot deep Galvanising
Drive Unit Imported & Indian make electromechanical drive having features such as powerful startup & thermal sensors
Single( A.C & D.C )/Three Phase
Emergency Operation Manual release knob
Accessories (Optional)
Operational Accessories
Additional Push Button
Key switch
Remote Control with receiver
Magnetic Loop Detector
Safety Accessories
Safety Photocell
Vertical Safety Edge Sensor
Indicative Accessories
Flashing Light
Features Interlocking with existing boom barriers if required
  • 1


  • 2


  • 3


  • 4


  • 5

    Food Industries

  • 6

    Retail & Mall

  • 7


  • 8


  • 9


  • 10

    Villa Residency

  • 11

    Chemical Industries

  • 12

    Educational Institutions


Enter your keyword