“Gate operators are designed to open vehicular gates in a residential, commercial & industrial application and We offer a wide variety of sliding gate types and slat configurations, which we custom manufacture for each particular customer need”

Motorised Sliding Gates

Automatic Sliding Gates are a good way of creating more useable space for parking from the area which would have been required for swing gate opening. Automatic sliding gates are also a good solution where the driveway slopes up and away from the gates, where the slope would have prevented swing gates from opening, sliding gates are ideal for automatic operation there. A ‘sliding setup’ is required which, for a single gate, consists of 2 easy-roll wheels (fitted to the gate), a roller post, a slam keep post and a steel track of double the gate opening size which has to be concreted into the ground.

Our best-selling automatic sliding gates use electromechanical operator which transmits movement to the gate leaf by means of a rack and pinion to the sliding gate. The irreversible system ensures that the gate is mechanically locked when the motor is not in operation and therefore it is not necessary to install a lock. The gear motor is equipped with an adjustable mechanical clutch which affords the necessary adjustable anti-crushing safety. A release device allows the gate to be operated manually in the event of a power failure or malfunction.Safety is ensured by photocells and safety edges which monitor the gate area during the closing cycle. If activated, this will cause the gates to re-open and to remain open until deactivated.


  • Increased personal security with driveway gates operated from the safety of your home or industry

  • These Sliding Gates are widely used and Economical option among all the types of gates

  • Increased privacy – no uninvited visitors

  • Wide range of electromechanical operators for sliding gates upto 5000kg weight

  • Control to stop anytime while gate is moving

  • Works on Precise machine cut toothed pinion along with galvanized rack arrangement

  • Our sliding Gates are available in single side or double side sliding suggested to suit actual site condition

  • Bottom rail made up of polished bright bar which is supported by heavy duty I-beam.

  • Top Nylon guide rollers with bearings are used for smooth operation & to guide moving Leaf.

  • These Sliding Gates can be interlocked with entrance boom barrier as additional safety

  • Various industrial gate designs available to suit clients choice

  • Sand blasting, hot deep galvanizing process, painting can be provided

  • Quick release disengaging mechanism inside sliding doors enables changeover to manual operation in case of power failure

  • Optical beam sensor: Safety device to detect presence of vehicles and reversal of gate movement

  • It can be integrated with any kind of access controller system i.e. RFID device, Fingerprint and Biometric devices, Remote, card dispenser and Push button etc…

Motorised Conventional Sliding Gate
Width Min./Max. Single Leaf : 1200/16000mm
Double Leaf :1200/32000mm
Height Min./Max. 1000/3300mm
Larger Dimension on request
Opening Direction Horizontal
Mounting Location Inside/ Outside
Mounting Surface Bottom Rail: RCC
Columns : RCC
Pattern Standard Mild Steel Tubular pattern
Internal vertical member Heavy Duty Vertical Box sections
(or Customized design available on request)
Bottom Rail Polished bright bar( round, rectangular, square ) with I-beam or C-channel support
Dual track bottom rail for large opening gates as per design, ( Mild Steel, Galvanised steel, Stainless Steel )
Bottom Rollers Heavy Duty Bottom Wheel with both side bearings and Wheel cups,  ( Mild Steel, Galvanised steel, Stainless Steel )
Full height Column Heavy Duty Box Section
(or Customized design available on request)
Guide Rollers Nylon Rollers with bearings both side mounted on column for support & smooth movement of gate.
Other available gate material Stainless Steel,
Hot dip Galvanized, Cast Iron
Sheets M.S/GI/Perforated /Aluminium sheets
Polycarbonate / Acrylic / PVC Sheet/Glass/Wood/WPC Wood/Fundermax panels
Ornamental Designs On Request or as per client or architect design.
Options Available Spikes as per requirement
Wicket gate/Side Gates in the similar pattern as the main gate
Any type of Customized Design can be made on request.
Surface Finish Surface preparation:-Sand Blasting
Standard: Primer Finish
Optional: Enamel Painting/Duco/PU painting/ Powder coating/ Hot deep Galvanising
Drive Unit Imported & Indian make electromechanical drive having features such as powerful startup & thermal sensors
Single( A.C & D.C )/Three Phase
Emergency Operation Manual release knob
Accessories (Optional)
Operational Accessories
Additional Push Button
Key switch
Remote Control with receiver
Magnetic Loop Detector
Safety Accessories
Safety Photocell
Vertical Safety Edge Sensor
Indicative Accessories
Flashing Light
Features Interlocking with existing boom barriers if required
  • 1


  • 2


  • 3


  • 4


  • 5

    Food Industries

  • 6

    Retail & Mall

  • 7


  • 8


  • 9


  • 10

    Villa Residency

  • 11

    Chemical Industries

  • 12

    Educational Institutions

  • 13

    Residential House



Enter your keyword