"Bi-Folding speed trackless gates designed with high security in mind. Gates manufactured with a post with a bi-folding leaf attached. The gates have a hinge between the leafs which further assists in very fast operation speeds"

Motorised Bi Folding Trackless Swing Gates

“We believe that with property sizes getting smaller, you need your space more than ever. The trackless bi fold swing gate was designed specifically with space constrained properties in mind allowing you to have an automatic gate and still have room to park your car. C4G’s unique and innovative system was designed and manufactured in house, making us the only company offering this service in the Bangalore based and India area”

If you are one of the many people who have limited / restricted space or a sloping drive and have never been able to consider an automatic gate before, you now can!

Also, perfect for those garages or basement parking which do not have enough space above to fit a roller or tilt door.

Compact, space saving and very quiet. Taking up half the space of a standard swing or sliding gate, our bi-fold security gate is the one for you.

Perfect for inner city living, smaller blocks, short and narrow drives, lane-way access, units and apartment complexes, commercial warehouse / factory complexes, retirement villages, general workplace entrances, height restricted garages, basement car parking, etc. Custom made to your chosen design.

Why we developed our Bi-fold security gate and the story behind it

With the needs and requests of many of our clients, it motivated us to design and develop our very own Bi-Fold Trackless Automatic Gate System, made here in Bangalore India.

It was originally developed for one of our clients with an inner city small, narrow block who could not fit a standard swing or sliding gate. Wanting a gate for security, we decided to work on developing one for him and so our trackless bi-fold was born.

How it Works

When space requires a gate to only fold to one side or both sides but with limited space, we can install a solution that uses only two leaves each side that fold back out of the way in one direction giving maximum vehicular entry needed.

When the drive has an incline rising upwards that a standard swing gate would bottom out on the drive, the bi- fold design only takes up a half of the space solving the problem.

As Bi-folds are mostly installed in limited spaces, (safety) Cells are installed for extra protection for when the gates are closing. Stopping gates closing onto cars.. if not fully in.

A center ground locking system is also installed, for the gates to lock into when closed, making the gates extra secure, as they cannot be pushed or forced open.

About our Bi-fold Gate Design

Our Trackless Bi-Fold Security Gate is a compact & space saving design, perfect for where there is not enough room to fit a normal swing or sliding gate. Often though, it is chosen purely because of its security, style and practicality. Custom made to your chosen design.

Modern, traditional or contemporary designs. Open or solid fill, bar grill, spear top, scrolls, wrought iron, timber, timber pickets, metal pickets or laser cut designs. We are happy to create a design specified by you. Powder coated to your choice of colour. Found a gate design you like but is not a bi-fold? Show us and we will turn it into one for you .

Top 10 Reasons why…
  • Specifically designed for those drives with limited and restricted space
  • When you don’t have the room to fit a swing or sliding gate
  • Sloping drives. Curved & U shaped driveways
  • Drives with retaining walls
  • Short driveways & narrow blocks
  • Giving more usable space to those smaller blocks
  • When sliding gate & tracks encroach into the path of pedestrian gates
  • With the bi-fold mechanism taking a lot of the weight of the gate, means less wear & tear on the gate motor.
  • Extremely quiet & smooth
  • Giving security, to those who never could before.
Advantages of being Trackless
  • Extremely quiet and smooth
  • No upkeep/maintenance keeping tracks clean from leaves and dirt
  • No upheaval of garden, to lay cement plinth for tracks
  • No damage to tracks from trucks & heavy vehicles
  • Aesthetically pleasing
  • Driveway stays neat & tidy

MOTORISED BI FOLDING TRACKLESS SWING GATES

  • Gates can be provided with either top or bottom guide track or in a new trackless version

  • One pair of bi-folding gates up to max 5 meters.

  • Single unit bi-folding gate up to max 10 meters

  • Gates are specially designed with top and bottom pivot mechanism

  • No gaps above the bi fold swing gate when installing into an existing structural aperture

  • Bi folding swing gate systems come complete with a through photo beam system between posts

  • Dust proof operating mechanism increases the life of our gates

  • Our Gates leafs are free from sagging/bending

  • Suits gates up to a weight of 1200kgs

  • Anti crushing safety device built in to the system

  • Easy to operate manual release in case of a power black out.

  • Opening / closing speed– fully programmable for slower speeds

  • Trackless design means unlimited overhead clearance and no special drains below

  • Ideal for tight spaces where there is little room to swing or slide a traditional automated gate

  • Unit arrives ready to bolt down and turn on, virtually no field assembly required

  • Electro-mechanical continuously rated overhead drive and guide track system

  • Infill can be custom designed to suit any architectural or client brief

  • Control to stop anytime while gate is moving

  • Sand blasting, Hot deep galvanizing process, painting can be provided

PRODUCT
Motorised Bi Folding Swing Gates
GATE DIMENSION
Width Min./Max. Single Leaf : 1000/3300mm
Double Leaf :2000/7100mm
Height Min./Max. 1200/2300mm
Larger Dimension on request
Max. Number of Leaves Single Bi Folding Leaf:1 Nos
Double Bi Folding Leaf:2 Nos
Mounting Location Inside/ Pillar center
Mounting Surface Columns : RCC
GATE STRUCTURE
Pattern Standard Mild Steel and Stainless Steel Tubular pattern
Internal member Heavy Duty Vertical Box sections
(or Customized design available on request)
Outer Frame Heavy Duty tubular box section
(or Customized design available on request)
Bottom Rollers Heavy Duty Bi Folding Swing Bottom Wheel with both side bearings and Wheel cups,  ( Mild Steel, Galvanised steel, Stainless Steel )
Full height Column Heavy Duty Box Section
(or Customized design available on request)
Hinges High precision top & bottom pivoted hinges with ball bearing / heavy duty hinges
PATTERNS/DESIGNS
Other available gate material Stainless Steel,
Hot dip Galvanized Steel, Cast Iron Steel, Mild Steel
Sheets M.S/GI/Perforated /Aluminium sheets
Polycarbonate / Acrylic / PVC Sheet/Glass/Wood/WPC Wood/Fundermax panels
Ornamental Designs On Request or as per client or architect design.
Options Available Spikes as per requirement
Wicket gate/Side Gates in the similar pattern as the main gate
Any type of Customized Design can be made on request.
FINISH
Surface Finish Surface preparation:-Sand Blasting
Standard: Primer Finish
Optional: Enamel Painting/Duco/PU painting/ Powder coating/ Hot deep Galvanising
DETAILS FOR AUTOMATION SYSTEM
Drive Unit Motor arm or Underground motor selection done on space availability & frequency of operation.
Single( A.C & D.C )Phase
Emergency Operation Manual release knob
Accessories (Optional)
Operational Accessories
Additional Push Button
Key switch
Remote Control with receiver
Magnetic Loop Detector
Safety Accessories
Safety Photocell
Vertical Safety Edge Sensor
Indicative Accessories
Flashing Light
Features Interlocking with existing boom barriers if required
  • 1

    Hospitals

  • 2

    Pharmaceutical

  • 3

    Aircraft

  • 4

    Shipyards

  • 5

    Food Industries

  • 6

    Retail & Mall

  • 7

    Automobiles

  • 8

    Engineering

  • 9

    Logistics

  • 10

    Villa Residency

  • 11

    Chemical Industries

  • 12

    Educational Institutions

ACCESSORIES

error: Content is protected !!

Enter your keyword